High-Flow Custom Intake Assembly gives your Dyna some punch!

CUSTOM INTAKE ASSEMBLIES

High-Flow Custom Intake Assembly gives your Dyna some punch!

                                                 ‘08-09 Harley Davidson DYNA Models  

 With over 6 Horsepower gain to the rear wheels, K&N’s New Custom Intake Assembly gives your Dyna the punch it needs, to get you movin’ down the highway!

May 2009, K&N Engineering, Inc., Releases a “New” High-Flow Custom Intake Assembly (RK-3931) for all 2008-2009 Harley-Davidson DYNA Models.  Designed to fit neatly behind your Dyna Model’s stock air cleaner cover, this new High-Flow, Custom Intake Assembly is performance designed to provide low restriction, resulting in increased horsepower & torque. 

An “Original” High-Flow filter provides a large filtration area offering low restriction and long service intervals.  A Zinc-coated Top-Plate ensures years of filtration without corrosion.  A Bump-Seal is used at the base to provide a perfect seal.  Like all most K&N High-Flow Filters, this filter is washable & reusable, pre-oiled and ready to ride.  The cast aluminum backing plate includes built-in, internal run breathers that directs heat dissipation direct to the throttle body.  A bolted-in, dyno-tuned, velocity stack increases airflow velocity into the throttle body.  Spacers and hardware are included to mount your stock Harley Davidson air-cleaner cover.  Fuel management modifications are not necessary to obtain increased performance.   

• Covered by the famous K&N Million Mile Limited Warranty®

Look for K&N High-Performance Air Filters, Oil Filters, and Complete Intake Assemblies for your motorcycle, car or truck at your at your local performance dealer!

                 K&N Engineering, Inc.

                951-826-4000 

GO TO: WWW.KNFILTERS.COM for more information and a performance dealer near you!

*NOTE:  KIT AND VEHICLE SPECIFIT DATA SHOWN, RESULTS WILL VARY FOR OTHER MODELS

K&N Engineering, Inc.

 

Run Title: Stock 2008 Harley Davidson Dyna Street Bob 96ci

Run Notes: Baseline stock run. 3^rd gear run. 1736 miles.

Run Date: 12/16/2008 9:50:33 AM

Stock.001: 59.66 °F 29.10 in-Hg Humidity: 48 % SAE: 1.00

Run Title: K&N 2008 Harley Davidson Dyna Street Bob 96ci

Run Notes: K&N RK kit installed. 3^rd gear run. 1936 miles.

Run Date: 12/16/2008 10:45:07 AM

K&N.002: 60.80 °F 29.07 in-Hg Humidity: 42 % SAE: 1.00

PRODUCT TESTED:       K&N CUSTOM INTAKE ASSEMBLY PART NO:  RK-3931

*NOTE:  KIT AND VEHICLE SPECIFIT DATA SHOWN, RESULTS WILL VARY FOR OTHER MODELS

K&N Engineering, Inc. of Riverside, California, is the inventor and leading innovator of High-Flow Technology, High-Flow Air Filters and Performance Oil Filters for Powersports and Automotive applications. K&N has been manufacturing our exclusive line of Performance Filters in Riverside California for more than 35 years. We continue to lead the way in pioneering new and innovative technologies designed to allow your car, truck, or motorcycle to get all the air it needs to perform its very best. K&N Engineering, truly a global company with offices in the U.K. and the Netherlands, continues to exist as a family owned business with an enthusiast mindset and a direct connection with power sports and motor sports that carries over throughout all levels of management and manufacturing. Today, K&N exists as both the sales and brand leader for performance filters, and maintains a stocking catalogue of over 5,000 part numbers, including an extensive line of factory replacement high-flow air filters, complete intake systems, and performance oil filters.

For more information about K&N Filters, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail tech@knfilters.com , or visit www.knfilters.com