Print This Page Print This Page

Spark Arrestor

SAFETY FIRST: Protective gloves and eyewear are recommended at this point.

Removal

Coat the threads of the spark arrestor bolts in molybdenum grease. Install the spark arrestor bolts and tighten the bolts to specification with an 8 mm socket.

2005 – 2007

(Specification for Spark Arrestor Bolt torque is 12 N-m or 9 ft-lb)

On the 2007 – 2013 models coat the threads of the spark arrestor bolts in molybdenum grease.

2007 and newer

(Specification for Spark Arrestor Bolt torque is 6 N-m or 4.4 ft-lb)

Was this information helpful? How can we improve it?

Your email address will not be published. Required fields are marked *

Table of Contents

Login



Signup Here
Lost Password