SAFETY FIRST: Protective gloves and eyewear are recommended at this point.
Place the motorcycle on a stand so the rear wheel is off the ground.
Remove the rear brake pedal. See the Brake Pedal topic for more information.
Remove the drive chain. See the Drive Chain topic for more information.
Remove the rear wheel. See the Rear Wheel topic for more information.
Remove the shock arm nuts and bolts that connect the shock arm to the shock link and the swing arm. See the Sock Linkage topic for more information.
Remove the rear brake hose guides, and slide the caliper off the back of the swing arm. See the Rear Brake Caliper topic for more information.
Loosen the swingarm pivot bolt with a 22 mm socket. Remove the swingarm pivot nut and washer.
. . . .
Login to view the full manual
Gain access to the best repair information for your vehicle, right now!