Left Hand Engine Cover and Sprocket Removal
Remove the footpeg bar by taking out the four bolts with nuts and lockwashers holding it to the frame.
Remove the shift pedal clamp bolt and slip the shift pedal off the shaft.
Take out the three screws holding the left hand engine cover to the crankcase. Remove the cover.
Flatten the lockwasher tab, and then use a sprocket holder (P/N T57001-165) and a socket wrench to remove the sprocket nut (the rear brake can also be used to prevent the sprocket from turning.)
. . . .
REGISTRATION REQUIRED
Gain access to the best repair information for your vehicle, right now!
