SAFETY FIRST: Protective gloves and eyewear are recommended at this point.
Remove the three Phillips head screws that secure the headlight shell to the headlight bracket.
Remove the two bolts that secure the headlight shell to the headlight bracket using a 10 mm socket.
Unplug the left and right turn signal wire connectors.
Disconnect the speedometer cable with a pair of pliers.
Pull back the rubber cover and unplug the headlight connector from the back of the headlight.
Hold the two bolts that secure the headlight bracket to the frame using a 12 mm wrench.
Loosen the two nuts using a 12 mm socket. Remove the nuts and bolts.
Remove the headlight holder bracket.
Assembly is the reverse of disassembly.
For information on replacing the headlight bulb see the Headlight Bulb Replacement topic for more information.