- Kawasaki KVF650 KVF700 Service Manual
CLICK HERE TO PRINT.
Inner Covers
SAFETY FIRST: Protective gloves and eyewear are recommended at this point.
The inner covers are made up of five pieces. One each side there is a front and rear inner cover. In the middle there is a single lower shroud.
On each front inner cover there are two front inner cover screws and two lower shroud screws.
Remove the front inner cover and lower shroud screws.
Remove the front inner covers.
Remove the front lower shroud.
Remove the two trim clips on each side from inside the front fender.
Remove the two rear inner cover screws.
Remove the rear inner covers.
Fit the rear inner covers into place.
Install the two rear inner cover screws and tighten them securely.
Fit the front lower shroud into place.
Fit the front inner covers into place.
On each front inner cover there are two front inner cover screws and two lower shroud screws.
Install the front inner cover and lower shroud screws and tighten them securely.
URLs in this post:
[1] Image: https://www.repairmanual.com/product/kawasaki-kvf650-brute-force-kvf650-kvf700-prairie-suzuki-twinpeaks-700-atv-printed-service-manual/
CLICK HERE TO PRINT.
Copyright © 2014 CYCLEPEDIA Online Manual. All rights reserved.