- Kawasaki MT1 / KV75 Service Manual

Wheels and Brakes

Front Wheel Removal

Remove the adjuster from the lower end of the front brake cable.

Take out the bolt holding the brake panel to the lower fork leg.

Remove the axle nut and washer, and then pull the axle out, using a support under the engine to allow the front wheel to drop out. Two axle collars (spacers) will come out with the wheel.

Installation Notes:

Be sure to include the two axle collars Tighten the axle nut to 4.5 – 6.2 ka-m (32 5 -44.8 lb-ft) of torque.

Adjust the front brake.

Front Hub Disassembly

Pull the brake panel assembly out of the brake drum and then remove the four bolts with lockwashers that hold the drum to the hub.


. . . .

REGISTRATION REQUIRED

Gain access to the best repair information for your vehicle, right now!

[1]

Existing Member?

This manual is partially open to the public to give a preview of the content. You must be logged in to view the complete manual.

Login Here [2]

If you have a subscription with access to this manual, are logged in, and are still seeing this message refresh this page.

URLs in this post:

[1] Image: https://www.cyclepedia.com/amember4/signup/index/c/CPP-190

[2] Login Here: https://www.cyclepedia.com/amember4/member/index

Copyright © 2014 CYCLEPEDIA Kawasaki MT1 / KV75 Online Manual. All rights reserved.