Print This Page Print This Page

Engine Removal

Drain the transmission. Remove both drain plugs.

Pull the spark plug wire off the spark plug.

Remove the carburetor.

Remove the muffler.

Remove the oil pump cable.

Take out the oil pump inlet line banjo bolt. Oil will run out. Quickly raise the open end of the oil line above the level the oil in the tank and wire it there.

Loosen the cylinder stay bolts. Take off the nuts, but leave the bolts in place.

. . . .


Gain access to the best repair information for your vehicle, right now!

Existing Member?

This manual is partially open to the public to give a preview of the content. You must be logged in to view the complete manual.

Login Here

If you have a subscription with access to this manual, are logged in, and are still seeing this message refresh this page.

How Can We Improve this Page?