SAFETY FIRST: Protective gloves and eyewear are recommended at this point.

Note: These instructions are very general, and you should have a service manual for your particular vehicle to get a better understanding of your particular setup and have factory recommended torque levels and specifications on hand.

Check out the Additional Service Information Resources ^[1] for more information on finding service information for your specific vehicle.

Prep

Thoroughly clean the vehicle to make the job easier and prevent contamination of the new components during installation.

Get your chain roller replacement kit from ALL BALLS RACING ^[2].

Remove the contents of your ALL BALLS RACING chain roller replacement kit.

Layout the components in an organized manner for easy installation. Note: wait to do this until the old parts are removed and you are ready to begin installing the new components.

Chain Roller Replacement

Remove the old chain roller.

Install the new chain rollers with the washer against the frame.

Tighten the fasteners securely. Follow the torque specifications in the vehicle’s service manual. Make sure the rollers spin freely.

INSTALL ALL BALLS RACING STICKER!