SAFETY FIRST: Protective gloves and eyewear are recommended at this point.
Removal
Drain the oil and remove the filter. See the Engine Oil topic for more information.
Remove the following engine components:
There are two oil pipes on the left side of the engine.
Remove the three outer oil pipe bolts with an 8 mm socket.
Remove the outer oil pipe.
Locate the inner oil pipe. Loosen the mounting bolt with an 8 mm socket.
Remove the inner oil pipe mounting bolt.
Remove the inner oil pipe.
Locate the right oil pipe. Loosen the mounting bolt with an 8 mm socket.
Remove the right oil pipe.
Installation
Use new O-rings on the oil pipes. Coat the new O-rings in fresh engine oil before installation.
Install the right side oil pipe and mounting bolt.
Tighten the oil pipe bolt to specification.
Oil Pipe Bolts: 8.8 N-m, 0.9 kgf-m, 78 in-lb
Install the left side inner oil pipe and mounting bolt. Tighten the bolt to specification with an 8 mm socket.
Oil Pipe Bolts: 8.8 N-m, 0.9 kgf-m, 78 in-lb
Fit the outer left side oil pipe into place.
Insert the three outer oil pipe bolts and tighten them to specification with an 8 mm socket.
Oil Pipe Bolts: 8.8 N-m, 0.9 kgf-m, 78 in-lb
Install the following engine components.