Joint Boot Inspection

Like this Manual? Buy the Printed Version and get... - One Year Free Tech Support - Easy to Use - Sturdy Lay Flat Binding - Fast Shipping - Support This Site - Remove Ads - Enhanced Content

SAFETY FIRST: Protective gloves and eyewear are recommended at this point.

Front Axle/Steering Knuckle Joint Boot Inspection

Remove the two bolts on the front of the axle guard with an 8 mm socket.

Remove the bolt on the rear of the axle guard with an 8 mm socket.

Remove the guard.

Check the front axle joint boots for wear, leaks, tears or any other damage.

Check the steering knuckle joints for wear, leaks, tears or any other damage.

See the Front Axles topic for more information.

Front Propeller Shaft Boots

Check the front propeller shaft boots for wear, leaks, tears or any other damage. See the Front Differential topic for more information.

Rear Propeller Shaft Joint Boot Inspection

Check the rear propeller shaft boot for wear, leaks, tears or any other damage. See the Swingarm topic for more information.

Tie-Rod End Boot

Inspect the tie-rod boots for wear, leaks, tears or any other damage. See the Tie-Rods topic for more information.