Footrests

SAFETY FIRST: Protective gloves and eyewear are recommended at this point.

Removal

Footrest Side Covers

On each side there are three screws and nuts that hold the front fender flaps to the footrests. Remove the screws and nuts with a #3 Phillips screwdriver and a 10 mm socket.

On the right side there are three screws and nuts that hold the rear flap to the footrest. Remove the screws and nuts with a #3 Phillips screwdriver and a 10 mm socket.

On the left side there are three screws and nuts that hold the rear flap to the footrest. Remove the screws and nuts with a #3 Phillips screwdriver and a 10 mm socket. Remove the other two screws with a #3 Phillips screwdriver.

Remove the four footrest mounting bolts.

Remove the footrests from the frame. To remove the pegs take out the two peg nuts and bolts.

Installation

Install the pegs to the footrests and tighten the nuts and bolts securely.

Fit the footrests into place.

Install the four footrest mounting bolts and tighten them securely.

Install the three screws and nuts that hold the rear flap to the footrest on the right side. Tighten the screws and nuts securely with a #3 Phillips screwdriver and a 10 mm socket.

Install the three screws and nuts that hold the rear flap to the footrest on the left side. Tighten the screws and nuts securely with a #3 Phillips screwdriver and a 10 mm socket. Install the other two screws with a #3 Phillips screwdriver.

Install the three (each side) screws and nuts that hold the front fender flaps to the footrests.

Hold the screws with a #3 Phillips screwdriver and tighten the nuts securely with a 10 mm socket.